7690 replies to this topic

[stinkerbelll]

Well, there are sort of 2 paths you can take:

• Buy an Advanced Subscription: http://www.neocodex....p=subscriptions
• Be active in the community and get upgraded to another rank somehow. Note that this method is much longer than the first.

Anything else you can probably find here: http://www.neocodex....sked-questions/

Cheers! Sorry for being so clueless.

[Icey Defeat]

I hate to say it, I am also running into the problem where I'm apparently getting items, but they never show up... Attic items are processing correctly, but not a single item I bought in the main shops has actually been bought.

[darkwizard]

I hate to say it, I am also running into the problem where I'm apparently getting items, but they never show up... Attic items are processing correctly, but not a single item I bought in the main shops has actually been bought.

The only thing I'd check is the item management to see if you're storing it some place you're not checking. Other than that, I'm not having this issue so I can't really help. Is it with all items, some items, at a certain time of day, or what?

[Skell]

I checked everywhere -- maybe because it was the first item ever purchased through this autobuyer that it was funky? Yeah, I don't know. I edited it such that items will land in my SDB as opposed to going to the shop right away (which is what it was set at before, but never got there...).

Could have been a random event! It was just so bizarre. And it was a plushie! I love those, haha.

Thank you everyone for your input. C:

[Icey Defeat]

The only thing I'd check is the item management to see if you're storing it some place you're not checking. Other than that, I'm not having this issue so I can't really help. Is it with all items, some items, at a certain time of day, or what?

No idea. Now I'm getting some of them. For example, I've apparently bought 8-10 Gourmet Cooking For Your Pet's and none have appeared. When it goes to price the item, Abrosia freezes, not in SDB or anything.

[Tribe]

Just wondering if anyone else is having problems with Abrosia? All other programs are working fine, when I start it up I get this:


Exception in thread Thread-19:
Traceback (most recent call last):
File "threading.pyc", line 552, in __bootstrap_inner
File "Programs/1001/Abrosia.py.nc", line 694, in run
File "Programs/1001/Abrosia.py.nc", line 990, in processNextTaskItem
File "HTMLParser.pyc", line 108, in feed
File "HTMLParser.pyc", line 148, in goahead
File "HTMLParser.pyc", line 266, in parse_starttag
File "HTMLParser.pyc", line 115, in error
HTMLParseError: junk characters in start tag: '=l(my user name)>', at line 651, column 14

I've uninstalled and reinstalled the program manager too

[Icey Defeat]

Just wondering if anyone else is having problems with Abrosia? All other programs are working fine, when I start it up I get this:


Exception in thread Thread-19:
Traceback (most recent call last):
File "threading.pyc", line 552, in __bootstrap_inner
File "Programs/1001/Abrosia.py.nc", line 694, in run
File "Programs/1001/Abrosia.py.nc", line 990, in processNextTaskItem
File "HTMLParser.pyc", line 108, in feed
File "HTMLParser.pyc", line 148, in goahead
File "HTMLParser.pyc", line 266, in parse_starttag
File "HTMLParser.pyc", line 115, in error
HTMLParseError: junk characters in start tag: '=l(my user name)>', at line 651, column 14

I've uninstalled and reinstalled the program manager too

Are you a Neopets Premiere member or w/e it's called? If so, turn off the theme / portal.

[Tribe]

Are you a Neopets Premiere member or w/e it's called? If so, turn off the theme / portal.

Yes, thank you for your help.

[shmoot]

Recently it's just been getting stuck on initializing.
Tried uninstalling, messing with settings but nothing I've done so far is working.
I imagine there's a fix somewhere in the thread but it's a looooong thread ;p

[Irradium]

What error does it display, if any?

[shmoot]

None if I just hit start with no proxy - it just stays on initializing forever

If I try to enter a proxy I get

Traceback (most recent call last):
  File "/cdx/svn/checkout/core/trunk/Program Manager/Lib/NPLogin/NPLogin.py", line 295, in TestProxy
  File "/cdx/svn/checkout/core/trunk/Program Manager/Lib/HTTPwrapper.py", line 111, in GetWrapper
  File "urllib2.pyc", line 394, in open
  File "urllib2.pyc", line 412, in _open
  File "urllib2.pyc", line 372, in _call_chain
  File "urllib2.pyc", line 712, in <lambda>
  File "urllib2.pyc", line 721, in proxy_open
  File "urllib.pyc", line 1556, in proxy_bypass
  File "urllib.pyc", line 1507, in proxy_bypass_registry
UnicodeEncodeError: 'ascii' codec can't encode characters in position 83-86: ordinal not in range(128)

Edited by shmoot, 17 April 2012 - 10:27 AM.

[Irradium]

None if I just hit start with no proxy - it just stays on initializing forever

If I try to enter a proxy I get

Traceback (most recent call last):
  File "/cdx/svn/checkout/core/trunk/Program Manager/Lib/NPLogin/NPLogin.py", line 295, in TestProxy
  File "/cdx/svn/checkout/core/trunk/Program Manager/Lib/HTTPwrapper.py", line 111, in GetWrapper
  File "urllib2.pyc", line 394, in open
  File "urllib2.pyc", line 412, in _open
  File "urllib2.pyc", line 372, in _call_chain
  File "urllib2.pyc", line 712, in <lambda>
  File "urllib2.pyc", line 721, in proxy_open
  File "urllib.pyc", line 1556, in proxy_bypass
  File "urllib.pyc", line 1507, in proxy_bypass_registry
UnicodeEncodeError: 'ascii' codec can't encode characters in position 83-86: ordinal not in range(128)

Hmmm, that is confusing - apart from maybe reinstall again and make sure that all the proxy settings and everything are all good (because UnicodeError are usually a result of input conversion), I don't know what to suggest. Sorry.

[RitzWin]

None if I just hit start with no proxy - it just stays on initializing forever

If I try to enter a proxy I get

Traceback (most recent call last):
  File "/cdx/svn/checkout/core/trunk/Program Manager/Lib/NPLogin/NPLogin.py", line 295, in TestProxy
  File "/cdx/svn/checkout/core/trunk/Program Manager/Lib/HTTPwrapper.py", line 111, in GetWrapper
  File "urllib2.pyc", line 394, in open
  File "urllib2.pyc", line 412, in _open
  File "urllib2.pyc", line 372, in _call_chain
  File "urllib2.pyc", line 712, in <lambda>
  File "urllib2.pyc", line 721, in proxy_open
  File "urllib.pyc", line 1556, in proxy_bypass
  File "urllib.pyc", line 1507, in proxy_bypass_registry
UnicodeEncodeError: 'ascii' codec can't encode characters in position 83-86: ordinal not in range(128)

I deal with these problems all the time at my job. I'm not sure about the PM, but at my job it's because of a failed conversion of an accented letter like 'é' . Does your proxy contain any non-ascii characters?

[shmoot]

I deal with these problems all the time at my job. I'm not sure about the PM, but at my job it's because of a failed conversion of an accented letter like 'é' . Does your proxy contain any non-ascii characters?

Definitely not, tried with a few different ones and it's giving me the same thing.
Then even without a proxy it just isn't going beyond initializing... I just uninstalled and re-installed but same issue.
Thanks for quick responses btw

[RitzWin]

Definitely not, tried with a few different ones and it's giving me the same thing.
Then even without a proxy it just isn't going beyond initializing... I just uninstalled and re-installed but same issue.
Thanks for quick responses btw

How about user/pass/pin I don't know if neopets allows non-ascii characters for those... but that might have an impact.

[shmoot]

How about user/pass/pin I don't know if neopets allows non-ascii characters for those... but that might have an impact.

Not changed them and it worked before - just been the last few days I've had problems

Re-installed and everything works fine till I trying an put in a proxy then it just totally breaks the program until I reinstall.

[RitzWin]

Not changed them and it worked before - just been the last few days I've had problems

Re-installed and everything works fine till I trying an put in a proxy then it just totally breaks the program until I reinstall.

I got nuthin more. I don't get to look at PM's code

[AnAngryAsian]

Should I be scared if I'm getting sub 150 ms buy times in Garage sale? Or is garage such low profit that TNT doesn't bother checking? xD

[Irradium]

Should I be scared if I'm getting sub 150 ms buy times in Garage sale? Or is garage such low profit that TNT doesn't bother checking? xD

TNT doesn't really bother that much about Igloo, but you want to consider putting them up anyway.

[AnAngryAsian]

All right. Thanks for the advice.

[Irradium]

All right. Thanks for the advice.

No problem.

[Zinkk]

When I try to test my connection to a proxy it either freezes and crashes abrosia, OR it tells me it could not connect or has timed out. I know the proxy works, as it is working fine on FoxyProxy. Any idea what's going on with it?

I've removed Abrosia and re-installed it, and it's still not working.
It seems Abrosia has issues connecting to a proxy as it works fine if I choose not to use the proxy.
I've tried different proxies and such and they all say the same -- yet they work fine in the internet so I don't understand why Abrosia isn't able to reach them.

Edited by Zinkk, 18 April 2012 - 01:46 PM.

[TundraWolf]

I have this same issue

[lackofaith]

This has probably been said a million, jillion times, but..thank you for this program. It's beautifully done, easy-to-use, and overall amazing. I love the people who've made this happen.

[Leaf]

This is not really a problem with the program, Its probably related to the item database or something. Lately I have been getting buys from the attic that read something like::


Attic Bought Xampher Plushie: 7884 NP in 505ms (Est. Profit: -7884 NP)
Attic Bought Last Years Resolutions: 6722 NP in 500ms (Est. Profit: -6722 NP)

or sometimes it will buy things like

Attic Bought 1/3 Yummy Cloud Pizza: 1234 NP in 505ms

With no estimated profit... Like if it was an unbuyable or a new item not yet in the system. The only problem is that the items are always in the system and they are always losing profit. They are in the red.
Any ideas on why its doing this?