1161 replies to this topic

[nanny]

do you have the same like me?
the decoder gave me for your data
5-9-12
5-12-9
9-5-12 and so far and so forth
-----------------
I wasnt able to get any codes..

[mokelchen]

yeah... I know... because there was some spaces in your mods, I just saw it when I put it into my MS word.
The best thing is, when you get the mods, copy it into your word (or other word prog if you have a mac)... then you can see if there were some spaces between (if yes, close the spaces)... then you can copy and paste it clean into your calculator and you'll have no probs with the codes

[nanny]

ok.i will try that..thank you so much for your help

i did that and i dont see any spaces

[duckypoo]

Can someone help me out as well? I've got the program up and running. I've gotten the Message ID and I have input the Start Key, Target, and Characters (they were A-F, so I used 6). I've clicked on Solve, and nothing happens.

Can someone help me out as well? I've got the program up and running. I've gotten the Message ID and I have input the Start Key, Target, and Characters (they were A-F, so I used 6). I've clicked on Solve, and nothing happens.

If it helps, I've got this:
Key: FEDADAAC
Target: FFDCBBED
Chars: 6

And I do have the Triple button selected.

[mokelchen]

@Duckypoo: check that there are no spaces between... then check if its not an incomplete message, if yes, go to the next "complete" one and try again.

@ Nanny... you got mail...

[nanny]

i have looked and looked i really dont see any spaces.

[duckypoo]

@Duckypoo: check that there are no spaces between... then check if its not an incomplete message, if yes, go to the next "complete" one and try again.

@ Nanny... you got mail...

No spaces that I can tell of...And I don't see near the bottom where is says Incomplete Message. I pulled up other messages to double check and those others say Incomplete.

[mokelchen]

@Ducky: and you put the Mods into the modifier list?
Without the mods it wont work...

[duckypoo]

No spaces that I can tell of...And I don't see near the bottom where is says Incomplete Message. I pulled up other messages to double check and those others say Incomplete.

I copied the code directly into Notepad, then copied each item and pasted them into the program.

@Ducky: and you put the Mods into the modifier list?
Without the mods it wont work...

OH! No, I didn't do that. Let me try.

@Ducky: and you put the Mods into the modifier list?
Without the mods it wont work...

WONDERFUL! Gold star for you Now I just try each of them, until one works?

[mokelchen]

Nanny... I gave you the numbers you need für the Message you've postet...
use them!
and read the mail I'd send you...
I'm in a good mood and like to help... so read your mail

@ Ducky: all you need is to put in your Key, then your target, the nuber 6 or 7 you need and theeeeeeeeeen (this is important!) put ALL the mods into the modifier list... click solve... taddddaaaa
then you must see some numbers in your output

ALL 30 mods at the same time *grin*

[nanny]

Nanny... I gave you the numbers you need für the Message you've postet...
use them!
and read the mail I'd send you...
I'm in a good mood and like to help... so read your mail
---------------

thank you so much

[ninjadude418]

I get the program to work. I input everything and I eventually get a long list of outputs.

I get something like
19-17-30
30-17-19
25-26-7
7-26-25
etc.

But NONE of the combinations work. And if order doesn't matter, why am I getting different permutations of the same three numbers? Help anyone?

And in case if it matters, I let V = A, X = B, C = C, S = D, T = E, and 8=F.

Am I supposed to be logged onto my NP account? Do I have to do something with the message ID? I don't see a textbox to put it in anywhere...

Edited by ninjadude418, 10 February 2008 - 11:08 AM.

[pinky111]

I get the program to work. I input everything and I eventually get a long list of outputs.

I get something like
19-17-30
30-17-19
25-26-7
7-26-25
etc.

But NONE of the combinations work. And if order doesn't matter, why am I getting different permutations of the same three numbers? Help anyone?

And in case if it matters, I let V = A, X = B, C = C, S = D, T = E, and 8=F.

did you take the game id number and put it in the link to bring up you codes ?

[ninjadude418]

did you take the game id number and put it in the link to bring up you codes ?

Hmm I figured it had to do something with the game ID number. What do I exactly have to do? I've read SOOOO many of the pages on this thread and others but I don't think I've seen what I have to do with the Id number exactly?

[pinky111]

Hmm I figured it had to do something with the game ID number. What do I exactly have to do? I've read SOOOO many of the pages on this thread and others but I don't think I've seen what I have to do with the Id number exactly?

you need to go to the very first page of this thread there is a step by step guide

[nanny]

hi, if any kind soul could help me get my last 3 (3 mods), i would be most grateful
my decoder will not give me any output codes. if you could use your decoder for me and mail me the codes
here are my message id`s.

Removed|0||AGDGCAEECD|BBEAFBECCF|3|BFACGFBDEF,FGGEEBFADG,EFEEABFGCB,DCGDDFCFCA,BBAFFCAAAE,ADFEBDDEAB,GGFDGEBBBB,CDCBFCGEEG,EAABFGBBBE,CFBBADDEED,EFFDDBBFFB,GDGBEBAACC,EGBFGFEAFE,BCFDDBGBDD,ECCEDEGCEC,ECCFBEGGAA,FGEGAEDBAA,BBAGAGDEAD,GGADAEBBFB,CBDFAGAECE,FDEACAFEBB,ECDEFAEFGC,EAFFAEGCDE,CDEBFAAGBE,CGEAEBBFBD,FFCAEFDEAA,BEFGEFGAGB,CFAGGEGECA,EECEAGBBDG,EDDEDDAEAD|10. Message ID:|Key:|Result:|Target:|Back To Inbox|Modifier 1:|Modifier 2:|Modifier 3:|


Removed|0||BDDFDDCB|DEDEABAC|3|AEDABBFC,EEABFEEB,EFAABCFF,EFAFBFDD,FAFBDFCC,ABEFEFDB,EEEAFBBE,DFDFCDDB,DBEDBBCB,BFDACBAC,CCCADBCC,DDAEBBFD,BAABAFED,CECEBAAF,BFBACFCC,DEFCCCBC,EADCCEEF,DFBFDFDD,ADDDEFCF,EFDEFBBF,DEBDDEFC,BEDEEBED,EDCDDCBE,ABEEEDBB,DBACBBFE,CDDCECFB,BCCFCEBE,ABEACFBE,CAECDDEB,BACECDDF|4. Message ID:|Key:|Result:|Target:|Back To Inbox|Modifier 1:|Modifier 2:|Modifier 3:|


Removed|0||EBGGGCGFBF|BDAGGFFEAD|3|BCEFFEEBEF,FCFCFEAFGC,CGFDBCDCBE,AFFAEDBBBF,GEDEEEBGBA,GAGAABGFBF,DDCFEBFECA,CDBAEFBBDB,CCACCGADEB,CGBDAEFBGC,FEEGDDEAFE,FAFBADDGEA,FDDFECFBEC,EFDBFGAGEE,ECAFCBEAFB,CCBFEBCCBB,FEBBBEBFAA,ECEGAAGFFC,CBBEFDEDDC,CGEFECDFDB,BEACBDCFAG,FCDGCCDDEB,BBAFEGBFFA,GBABCCEECC,GAFFCEGCFF,FCDFBGBDEA,GDECEEGCCB,FBBDBAGGGB,FBBFCEBAGD,EDAGBECFDC|17. Message ID:|Key:|Result:|Target:|Back To Inbox|Modifier 1:|Modifier 2:|Modifier 3:|

thank you.

Edited by Kitsune, 10 February 2008 - 06:22 PM.

[mumsiey]

hi, if any kind soul could help me get my last 3 (3 mods), i would be most grateful
my decoder will not give me any output codes. if you could use your decoder for me and mail me the codes
here are my message id`s.

Removed|0||AGDGCAEECD|BBEAFBECCF|3|BFACGFBDEF,FGGEEBFADG,EFEEABFGCB,DCGDDFCFCA,BBAFFCAAAE,ADFEBDDEAB,GGFDGEBBBB,CDCBFCGEEG,EAABFGBBBE,CFBBADDEED,EFFDDBBFFB,GDGBEBAACC,EGBFGFEAFE,BCFDDBGBDD,ECCEDEGCEC,ECCFBEGGAA,FGEGAEDBAA,BBAGAGDEAD,GGADAEBBFB,CBDFAGAECE,FDEACAFEBB,ECDEFAEFGC,EAFFAEGCDE,CDEBFAAGBE,CGEAEBBFBD,FFCAEFDEAA,BEFGEFGAGB,CFAGGEGECA,EECEAGBBDG,EDDEDDAEAD|10. Message ID:|Key:|Result:|Target:|Back To Inbox|Modifier 1:|Modifier 2:|Modifier 3:|


Removed|0||BDDFDDCB|DEDEABAC|3|AEDABBFC,EEABFEEB,EFAABCFF,EFAFBFDD,FAFBDFCC,ABEFEFDB,EEEAFBBE,DFDFCDDB,DBEDBBCB,BFDACBAC,CCCADBCC,DDAEBBFD,BAABAFED,CECEBAAF,BFBACFCC,DEFCCCBC,EADCCEEF,DFBFDFDD,ADDDEFCF,EFDEFBBF,DEBDDEFC,BEDEEBED,EDCDDCBE,ABEEEDBB,DBACBBFE,CDDCECFB,BCCFCEBE,ABEACFBE,CAECDDEB,BACECDDF|4. Message ID:|Key:|Result:|Target:|Back To Inbox|Modifier 1:|Modifier 2:|Modifier 3:|


Removed|0||EBGGGCGFBF|BDAGGFFEAD|3|BCEFFEEBEF,FCFCFEAFGC,CGFDBCDCBE,AFFAEDBBBF,GEDEEEBGBA,GAGAABGFBF,DDCFEBFECA,CDBAEFBBDB,CCACCGADEB,CGBDAEFBGC,FEEGDDEAFE,FAFBADDGEA,FDDFECFBEC,EFDBFGAGEE,ECAFCBEAFB,CCBFEBCCBB,FEBBBEBFAA,ECEGAAGFFC,CBBEFDEDDC,CGEFECDFDB,BEACBDCFAG,FCDGCCDDEB,BBAFEGBFFA,GBABCCEECC,GAFFCEGCFF,FCDFBGBDEA,GDECEEGCCB,FBBDBAGGGB,FBBFCEBAGD,EDAGBECFDC|17. Message ID:|Key:|Result:|Target:|Back To Inbox|Modifier 1:|Modifier 2:|Modifier 3:|

thank you.

Hi Nanny, I tried using my decoder as well, and I get no output data either, maybe it needs to be re-downloaded? Try that....

[Thunderfox]

Sighs! Thank you for putting up with me. Everything works now. My deepest thanks and complemets to the site admis and the programer who created this tool.


Here's a tip. Copy and paste the code you get into note pad or word pad. Then seperate the key code, target and the mods ect. I found this trick makes copying the data into the decoder MUCH easier. hehe I was copying and pasting some of the info at the end of the mods. That's why I was getting the run time error 9 message

[Sandman66]

oh do i need some help here

my key is 8 charcters long so what would be my char..6?

but i really dont know

here is my key

key - 8VCCV8X8

target - PZ8PCCX2

and its a 3 mod

can anyone help me?

[Icey Defeat]

This program is god laser. You officially are a legend in my books.

[nanny]

sandman, you need to put that message id into this
http://www.neopets.c..._data.phtml?id=
in your browser
that will give you your key and target letters
then put that into the decoder

[nanny]

Hi Nanny, I tried using my decoder as well, and I get no output data either, maybe it needs to be re-downloaded? Try that....


-------------
yea, i have tried that several times

[Sandman66]

sandman, you need to put that message id into this
http://www.neopets.c..._data.phtml?id=
in your browser
that will give you your key and target letters
then put that into the decoder

i got that up but i dont know what my char number is and how much of the key i should put in the program once i fig that out...ill be all good

[nanny]

i got that up but i dont know what my char number is and how much of the key i should put in the program once i fig that out...ill be all good
---------------
A-E=5
A-F=6
A-G=7

the first letter of the key and tarket
that would be your char




put in the whole tarket and key letters

[Gin]

I disabled my firewall, but the decoder still won't work. The checking thing comes up, and after I put in my user and password, at the bottom, it says Logged in, Verifying Program 0. After that, two messages pop up and says error. The first one is Run-time error '40006'
Wrong protocol or connection state for the requested transaction or request. The second one says Codex Check Module Version: 3.1.4.0
DLL Set-up Error -RunCodexCheck- 440 - Automation error.

I tried disabling my firewall, but it still won't work.