1161 replies to this topic

[nanny]

i guess no one wants to help me with my last 3. as i posted alittle earlier

[Icey Defeat]

I disabled my firewall, but the decoder still won't work. The checking thing comes up, and after I put in my user and password, at the bottom, it says Logged in, Verifying Program 0. After that, two messages pop up and says error. The first one is Run-time error '40006'
Wrong protocol or connection state for the requested transaction or request. The second one says Codex Check Module Version: 3.1.4.0
DLL Set-up Error -RunCodexCheck- 440 - Automation error.

I tried disabling my firewall, but it still won't work.

Please make sure you have installed the required runtime files, which can be found in the required downloads area

[chalupabatman]

If anyone needs help you can send me the decoding info and ill send you the combination. Just go to http://www.neopets.c...a.phtml?id=???? to get the data. Note:this is for people who are having trouble downloading the program or they just can't figure it out.

Edited by darkkey, 10 February 2008 - 03:55 PM.

[Sandman66]

i got that up but i dont know what my char number is and how much of the key i should put in the program once i fig that out...ill be all good
---------------
A-E=5
A-F=6
A-G=7

the first letter of the key and tarket
that would be your char




put in the whole tarket and key letters

what bout 8-P? what would that char be?

Edited by Sandman66, 10 February 2008 - 03:58 PM.

[Waser Lave]

what bout 8-P? what would that char be?

Read the guide on the first page...

[chalupabatman]

what bout 8-P? what would that char be?

There is no such thing as 8-P. It only ranges from 5-7.

[Sandman66]

There is no such thing as 8-P. It only ranges from 5-7.

well my start key is 8 char long that would be a six in the char section

[sphygmo]

i hope that, for the remainder of the plot, all message boards and forums arn't swamped with people stuck on the decoding.

[Sandman66]

subscript 9 is comming up whats that mean

[Waser Lave]

subscript 9 is comming up whats that mean

It means you can't even follow a guide properly.

[Sweeney]

It means you can't even follow a guide properly.

Ah well, you still lasted longer than I did

[chalupabatman]

well my start key is 8 char long that would be a six in the char section

It doesn't go by how long the start key is. You work it out by how many different letters show up in you modifier list, so if you get the letters containing A-E then you input 5. If you get letters containing A-F then you input 6 and if you get A-G then put 7.

[Sweeney]

It doesn't go by how long the start key is. You work it out by how many different letters show up in you modifier list, so if you get the letters containing A-E then you input 5. If you get letters containing A-F then you input 6 and if you get A-G then put 7.

Actually, they both correspond to the same thing.

[Sandman66]

wich mod list the one on neopets or the one off the other site

[Skwerl]

Whenever I try to run it I get to that weird loggin thingy and I use my neocodex username and password but it does not work.

[Waser Lave]

wich mod list the one on neopets or the one off the other site

Does the guide tell you to get it from some other site?

[Hydrogen]

Does the guide tell you to get it from some other site?

Get it from neopets .

Whenever I try to run it I get to that weird loggin thingy and I use my neocodex username and password but it does not work.

What seems to be the error?

[QTana4rea]

My logging in still doesn't work. I tried it on a different computer and it still cant log in. The program works fine.. but i cannot log in. -440- automation error

And cnmarine in neopets cracked the code, maybe that may be easier than just doing this decoder for those who just need it to do the plot step. However, hes been bombed with questions.. maybe you should'nt neomail him too much. I get the basic idea, something about modulos. You use excel, and type in your result, modifiers... convert them to numbers.. it takes less than 5mins for each 3 modifier.

[Hydrogen]

My logging in still doesn't work. I tried it on a different computer and it still cant log in. The program works fine.. but i cannot log in. -440- automation error

And cnmarine in neopets cracked the code, maybe that may be easier than just doing this decoder for those who just need it to do the plot step. However, hes been bombed with questions.. maybe you should'nt neomail him too much. I get the basic idea, something about modulos. You use excel, and type in your result, modifiers... convert them to numbers.. it takes less than 5mins for each 3 modifier.

Laser wave also cracked the code...and then programmed it into a program ... that's why the program works .

[chalupabatman]

I just helped two people with their decoding. If anyone else needs help just send me the info and ill decode it for you

[retrodiscokid]

has anyone you know gotten iced yet...i just used the pro...its really good. i love you guys haha...

[Hydrogen]

has anyone you know gotten iced yet...i just used the pro...its really good. i love you guys haha...

I invite you to stick around and post on our forums, chat with other players and make friends from all over the world. We have a great community here and I think you would really like it . Please tell your friends about us too .

[Icey Defeat]

has anyone you know gotten iced yet...i just used the pro...its really good. i love you guys haha...

I don't think anyone's been iced for this program. Unless you go and advertise your using it, you should be good

[chalupabatman]

Yeah you don't have to put any user info just the decoding stuff so like the description said, "it undetectable"

[retrodiscokid]

Yeah you don't have to put any user info just the decoding stuff so like the description said, "it undetectable"

thanks...that kinda eases my mind a bit. anyway its just a game...so if i get frozen...it would suck but it wouldn't be the end of my world.

but wow this program is awesome...i'll tell my friends...but not on neopets...duhhh. lol.

i was using this other helper...i dunno if you guys know about it...but it helped me solve the mods without the o symbol...but the mods with the o symbol...nothing. so that was a waste of time...so thanks again...i will be sticking around here!